manualshive.com logo in svg

Coyote Point Systems E350GX, Installation And Administration Manual

The Coyote Point Systems E350GX Installation And Administration Manual is a comprehensive guide that provides step-by-step instructions for setting up and managing your E350GX device. Download this manual for free from our website to easily configure and maximize the performance of your product.

Share
Download
background image

Chapter 7: Monitoring Equalizer Operation

204

Equalizer Installation and Administration Guide

Browsing Equalizer Configurations using SNMP

The Simple Network Management Protocol (SNMP) is an internet standard that allows a management station to 
monitor the status of a device over the network. SNMP organizes information about the Equalizer and provides a 
standard way to help gather that information. Using SNMP requires:

•

An SNMP agent running on the system to be monitored.

•

A Management Information Base (MIB) database on the system to be monitored.

•

An SNMP management station running on the same or another system.

An SNMP agent and MIB databases are provided on Equalizer Models E350

GX

 and above, implemented for 

SNMPv1 and SNMPv2c.

A management station is not provided with Equalizer and must be obtained from a third party supplier. The 
management station is often used primarily to browse through the MIB tree, and so is sometimes called a MIB 
browser. One such management station that is available in a free personal edition is the iReasoning MIB Browser, 
available from 

http://www.ireasoning.com

.

A MIB database is a hierarchical tree of variables whose values describe the state of the monitored device. A 
management station that want to browse the MIB database on a device sends a request to the SNMP agent running 
on the device. The agent queries the MIB database for the variables requested by the management station, and then 
sends a reply to the management station.

With SNMP, you can monitor the following information from the Equalizer MIBs:

Static configuration information, such as:

•

Device name and Model

•

Software version

•

Internal and external IP addresses and netmasks

•

Default gateway

•

Failover alias

Equalizer’s failover details

•

Sibling Name

•

Sibling Status (Primary or Secondary)

Dynamic configuration information, such as:

•

Failover status

•

NAT enabled

•

L4 configuration state

•

L7 configuration state

•

Server Health check status

•

Email status notification

•

Cluster parameters (timeouts, buffers)

•

Server parameters

Equalizer status

•

L4 Statistics

•

L7 Statistics

Equalizer cluster configuration

•

L4 or L7 protocol of cluster

•

Load balancing policy for cluster.

SNMP

is not

supported

on E250

GX

model 

Equalizers

Summary of Contents for E350GX

























































































































































































































































































































































Reviews:

No comments

Related manuals for E350GX

Samsung MM-N7 Service Manual preview
MM-N7
Brand: Samsung Pages: 22
Tecsun PL - 118 Operation Manuals preview
PL - 118
Brand: Tecsun Pages: 1
Fisher RS-2010 Operating Instructions Manual preview
RS-2010
Brand: Fisher Pages: 14
Roadstar HIF-8892EBT User Manual preview
HIF-8892EBT
Brand: Roadstar Pages: 80
Clarion DPH7500z Owner'S Manual preview
DPH7500z
Brand: Clarion Pages: 2
Bang & Olufsen BeoSystem 6500 User Manual preview
BeoSystem 6500
Brand: Bang & Olufsen Pages: 44
Qtx PPA72 User Manual preview
PPA72
Brand: Qtx Pages: 5
Harman Kardon AVR 355/230 Service Manual preview
AVR 355/230
Brand: Harman Kardon Pages: 125
HEIL PRAS EQ Manual preview
PRAS EQ
Brand: HEIL Pages: 8
Cisco Linksys DMC250 Quick Installation Manual preview
Linksys DMC250
Brand: Cisco Pages: 32
Cisco DMC350 Quick Installation Manual preview
DMC350
Brand: Cisco Pages: 64
JVC SP-PW100 Service Manual preview
SP-PW100
Brand: JVC Pages: 19
JVC RV-NB90 Instructions Manual preview
RV-NB90
Brand: JVC Pages: 36
JVC SP-UXQD90S Quick Manual preview
SP-UXQD90S
Brand: JVC Pages: 2
Pulsar Pulsar Massive User Manual preview
Pulsar Massive
Brand: Pulsar Pages: 35
APART PXQ2215 Owner'S Manual preview
PXQ2215
Brand: APART Pages: 2
Nagra CLASSIC PHONO User Manual preview
CLASSIC PHONO
Brand: Nagra Pages: 22
Sharp XL-MP110E Quick Start Manual preview
XL-MP110E
Brand: Sharp Pages: 2

Brands by name

Popular brands

Load more brands