Coyote Point Systems E350GX, Installation And Administration Manual

Page: 60 / 344

Chapter 3: Using the Administration Interface
60 Equalizer Installation and Administration Guide
The screen above shows that the default user
touch
has
add/del
permission on system parameters and user
definitions, and
add/del
on
ALL
. This means that
touch
has complete control over the system parameters, the
user definitions, and all the clusters on Equalizer.
4. If you make any updates to the login password or permissions, click
Commit
to save your changes. Otherwise,
click
Cancel
to return to the
Users
table.
Adding a Login
1. Log into the Administrative Interface over one of the currently configured IP addresses. Use a login that has at
least read access for global parameters (see “Logging In” on page 52).
2. Select
Equalizer > Permissions > Users
.
3. Select the add icon . The
Add New User
screen is displayed:
Figure 18 The add user screen
4. Type a
user name
and a
description
for the login. User names may only contain alphanumeric characters,
periods ( . ), dashes ( - ), and underscores ( _ ).
5. Type a
password
for the login and re-type it into the
confirm password
text box. Passwords must be between
6 and 128 characters long and should contain a mix of letters (uppercase and lowercase), numbers, and
metacharacters. A blank password is not permitted.
cluster permissions
ALL specifies the minimum permission the user has on all clusters below.
Below ALL is a line for each cluster that specifies the permission that the
user has on that cluster. If the permission on the cluster is to the left of the
permission given for ALL , then the ALL permission applies to the cluster
instead.