manualshive.com logo in svg

Coyote Point Systems E350GX, Installation And Administration Manual

The Coyote Point Systems E350GX Installation And Administration Manual is a comprehensive guide that provides step-by-step instructions for setting up and managing your E350GX device. Download this manual for free from our website to easily configure and maximize the performance of your product.

Share
Download
background image

Logging In and Navigating the Administrative Interface

Equalizer Installation and Administration Guide

53

Click the 

login

 button to log into Equalizer. The 

Home

 screen of the Administrative Interface is displayed, as 

shown on the following page.

Figure 15 The Home Screen of Equalizer’s Administration Interface

Navigating Through the Interface

The Equalizer Administration Interface (see Figure 15) is divided into three major sections:

1. The left side of the screen displays a hierarchical list of objects, as explained below.

•

Mode: Standalone

 or, if failover is configured, the 

Failover Peer Name

 

defined for the other Equalizer in 

the failover pair.
•

The Coyote Icon indicates the failover status of the peer: a sitting Coyote means the peer is in backup 
mode (or failover is not enabled); a running Coyote means the peer is in primary mode.

•

Click this item to open the 

Failover

 configuration tab on the right hand side of the screen.

•

Right-click this item to open a menu that displays the currently configured IP addresses and a menu of 
failover commands.

•

eq_

IP-address

, where 

IP-address

 is the IP address assigned to the Default VLAN (VLAN 1) -- see 

“Configuring the Default VLAN on E350/450/650GX” on page 43):
•

The Coyote Icon indicates the failover status of this Equalizer: a sitting Coyote means this Equalizer is 
in backup mode; a running Coyote means this Equalizer is in primary (or standalone) mode.

•

Click this item to open the 

Clusters > General

 tab in the right frame -- a summary of the configuration 

and status of all currently defined clusters and servers.

•

Click the plus sign (

+

) next to 

Equalizer

 to open a list of currently defined clusters.

Summary of Contents for E350GX

























































































































































































































































































































































Reviews:

No comments

Related manuals for E350GX

Yamaha RX-V673 Service Manual preview
RX-V673
Brand: Yamaha Pages: 60
JBL HTPS-400 Owner'S Manual preview
HTPS-400
Brand: JBL Pages: 8
Belson BSA-1520MP3 Service Manual preview
BSA-1520MP3
Brand: Belson Pages: 34
McIntosh MXA70 Owner'S Manual preview
MXA70
Brand: McIntosh Pages: 32
Looperlative LP1 Gen B User Manual preview
LP1 Gen B
Brand: Looperlative Pages: 29
Philips FW-C90 Specifications preview
FW-C90
Brand: Philips Pages: 2
Philips FW-C870 Specifications preview
FW-C870
Brand: Philips Pages: 2
Philips FW-C85/18 Specifications preview
FW-C85/18
Brand: Philips Pages: 2
Philips FW-C80 Specifications preview
FW-C80
Brand: Philips Pages: 2
Philips FW-C90 User Manual preview
FW-C90
Brand: Philips Pages: 29
Philips FW-C870 User Manual preview
FW-C870
Brand: Philips Pages: 30
Philips FW-D596 User Manual preview
FW-D596
Brand: Philips Pages: 48
Philips FW-D5/21 Service Manual preview
FW-D5/21
Brand: Philips Pages: 100
Philips FW-C870/19 Service Manual preview
FW-C870/19
Brand: Philips Pages: 105
Philips FW-D550 Manual preview
FW-D550
Brand: Philips Pages: 48
Philips FW-C870 Service Manual preview
FW-C870
Brand: Philips Pages: 108
Sony XAV-AX205DB Operating Instructions Manual preview
XAV-AX205DB
Brand: Sony Pages: 20
Sony XAV-V10BT Operating Instructions Manual preview
XAV-V10BT
Brand: Sony Pages: 31

Brands by name

Popular brands

Load more brands