The iJET Panel
2-1
2. Using the iJET Panel
Before setting up your copy/scan configuration, you will need to familiarize yourself with the iJET Panel. A
number of setup tasks are performed through the iJET Panel and will require that you know how to
navigate the iJET Panel
’
s menus.
Instructions on making specific settings will be described under each configuration type in the
chapter
“
Copy Scanner Configuration and Setup
”
.
Scan Option Area
Copy Option Area
Control Buttons
Size Button
Menu Button
Display Window
Stop Button
The iJET Panel enables you to perform advanced copy and scan-to-file jobs straight from the scanner
(and not from a PC and scanning software interface). The panel contains a display window, control
buttons and option buttons.
The
Display Window
contains the current selections as you make them and useful messages
from the scanner regarding maintenance and operation.
The
Menu
button
leads to a options for copy settings and an
Advanced
submenu for
configuration settings.
The control buttons
arrow up, arrow down,
Back
,
Enter
,
are for navigating the menus and for
selecting menu options.
The
Stop
button
is for interrupting a copy or scan process.
The
Size
button
is for setting the original
’
s size (input size) for both copy and scan jobs.
Below the control and menu buttons, are a
Copy Option Area
and a
Scan Option Area
, each
with its own set of quick option buttons. These buttons are described below.
An
overview of the panel
’
s buttons
follows at the end of this section.
