iJET Panel Quick Reference Guide
11-13
Options ->
Scanner Setup->
Media Offset
(not
available
on
flatbed scanners)
Scanning range offsets
Side Offset
Top Offset
Bottom Offset
0
–
xxx
Default: 0
The scanner media offset determines the
left, top and bottom points of the scanning
range. The media offset is set during
production, but you can correct slight offset
irregularities if they occur. Set values for
Side, Top, Bottom offsets.
An offset value in the Side field means that
the scanning field
’
s side reference point is
moved towards the middle.
An offset value in the Top or Bottom fields
mean that the scanning field
’
s top or bottom
point is moved down
Options ->
Scanner Setup->
ALE
Accuracy Lens Enhancement
Technology (ALE) electronically
maintains precision across any
two points of the scan line for
meeting strict accuracy
requirements.
Enable
Disable
Default
: Disable
The option should be enabled for scanning
tasks that require a high level of precision
such as the precise capture of scaled maps
and CAD drawings.
In rare cases, when scanning originals
printed with raster, the ALE function can
create interference that will appear as bands
in the output. This effect will be amplified if
the sharpen filter is also applied with the
scan/copy. In these cases it is
recommended to disable sharpening, ALE or
both.
Options ->
Scanner Setup->
Lamp
(Flatbed scanners
only)
Usually the lamp will only need
to turn on when starting a scan.
In some cases, with scan-to-
print, a newly started lamp will
cause unstable colors. This
option is a remedy for such
problems.
Automatic
Always On
Default
:
Automatic
Set to
Always On
if copies show color errors
(stripes) along the scan path. Otherwise use
the
Automatic
setting.
Options ->
Time and Date
For setting the internal clock to
the
local
time/date.
The
time/date setting is used by the
scanner
“
Timer
”
option.
Time format
Set Time
Set Date
Time Format: set to 24 hour or AM/PM
format.
Set Time: hh:mm
Set Date: yyyy-mm-dd
Options ->
Hard Disk
View information and routines
on the scanner
’
s internal hard
disk.
Disk Size
View Files
Format Disk
Disk Size
–
the physical space on the disk
View Files
–
list of files currently saved on
the disk
Format Disk
–
removes all saved data.
Service ->
Service
->
Replace Lamp
(available on flatbed
scanners only)
To move the lamp to a position
at the slide-door opening at the
back of a flatbed scanner so the
lamp can be pulled out and
removed.
‘
Enter
’
to go
Press
Enter
to position the lamp.
You can open the scan area cover to see the
lamp moving into position.
Wait until you hear the motor stop before
attempting to remove the lamp.
Service ->
Reset Lamp Cnt.
For all scanners. For resetting
the flag that tells users when it is
time to replace the lamp.
‘
Enter
’
to go
Press
Enter
if you have just replaced the lamp
with a new one. The internal flag will be reset to
zero and from there keep track of scanner lamp
usage.
Service ->
Print Settings
Print out all your system
’
s iJET
panel settings in order to review
them.
‘
Enter
’
to go
Press
Enter
to start the printout.
