48
payload signal. Sending DTMF tone as a signal could tolerate more packet loss caused by
the network. If this selection is enabled, the DTMF tone will be sent as a signal.
Outband 2833 Payload type value:
Choose a value from the pull-down menu.
RTP Timeout:
Specify a value for RTP timeout.
RTP packet lost Percentage:
Specify the packet lost Percentage.
Maximum ICMP Unreachable:
Specify the maximum ICMP unreachable value.
Outband 2833 Payload type value:
Choose a value from the pull-down menu.
Voice Active Detector:
Select a mode from the pull-down menu. The default setting of this
function is disabled.
Line Echo Canceller Tail Length:
Select Tail Length for line echo cancellation from the
pull-down menu. The echo canceller removes your echo from the returning audio stream
without removing responder’s voice.
Acoustic Echo Canceller Tail Length:
Select Tail Length for acoustic echo cancellation
from the pull-down menu.
Automatic Gain Control Tx Level:
The transmitting AGC level can be selected is from 0
(0db) to 30 (30db). The default setting is disabled.
Automatic Gain Control Rx Level:
The receiving AGC level can be selected is from 0 (0db)
to 30 (30db). The default setting is disabled.
