Connection Technology Systems VRG-21412-WF-G SERIES User Manual Download Page 61

Page: 61 / 63

FTP Firmware Upgrade

Absolute Path File Name:

Specify the firmware file name that you would like to upgrade.

IP or URL:

Specify the FTP server’s IP address or URL.

Port:

Specify the port that will be used. The default port number is 21.

FTP User Name:

Specify the FTP login user name.

FTP User Password:

Specify the FTP login password.

2.11 Save & Logout

Select

Save & Logout

from the

Main Menu

, then

Save & Logout

screen page appears.

Click the

“Save”

button to save current configuration settings. Please note that all unsaved

configurations will be lost when the power is off.

Click the

“Logout”

button to logout from the web management.

Click the

“Reboot”

button to restart the device.

Summary of Contents for VRG-21412-WF-G SERIES
































































Search results

Summary of Contents for VRG-21412-WF-G SERIES

Reviews:

Related manuals for VRG-21412-WF-G SERIES

Brands by name

Popular brands

Connection Technology Systems VRG-21412-WF-G SERIES, User Manual

Search results

Summary of Contents for VRG-21412-WF-G SERIES

Reviews:

Related manuals for VRG-21412-WF-G SERIES

Brands by name

Popular brands