39
By 802.1p:
Select priority queue mapping for TAG-0 to TAG-7 from the pull-down menu. It
includes Q0, Q1, Q2 and Q3.
Reserve BW:
Specify reserved Bandwidth of Queue-0 ~ Queue3. The bandwidth has to be
the multiple of 256.
2.5.2.1.4 By Application
By Application mode allows users to define a range of port number in terms of destination or
source port. If conditions are fulfilled, the queue and bandwidth will be applied.
No.:
The total of eight rules can be set up. The comparison process will start from rule No. 1
to No. 8. If the rule No. 1 is fulfilled, then the assigned queue and reserved bandwidth will be
applied. If not, each rule will be checked one by one.
Compare:
Four options are available for selection.
Doesn’t Compare:
This rule is disabled.
Source:
Use TCP source port to compare.
Destination:
Use TCP destination port to compare.
Destination & Source:
Use both TCP destination and source port to compare.
Port Start:
Specify the starting TCP port number from 0 to 65535.
Port End:
Specify the ending TCP port number from 0 to 65535.
