49
2.8.2 Call Service
Select
Call Service
from the
VoIP Management
menu,
then
Call service
screen page
appears.
Call Waiting:
The Call Waiting function allows you to answer the second incoming call while
you are already on a phone call. When the other caller tries to reach you when you are on
the phone, the call waiting feature will send a special tone to notify you of the incoming call.
To answer the second incoming call or switch back and forth between two calls, please
press Flash button or FlashHook once.
Call Waiting Timeout:
Specify Call Waiting timeout in seconds. If you would like to continue
with your first call and ignore a waiting call, this is the time that the second caller will wait
before disconnecting the waiting call.
NOTE:
When Call Waiting function is enabled, Call Forward function will be deactivated. In
other words, if you enable Call Waiting function and set up “Call Forward on Busy URI”
and “Call Forward on NoAnswer URI” at the same time, the waiting call will be
disconnected instead of forwarding to the specified number when time is out.
Attended Transfer Timeout:
Specify the time value for Attended Transfer timeout. When
time is out and the second called party does not answer the phone, the call will be
disconnected.
Call Repeat Timeout:
Specify the time value for Call Repeat timeout. If the number you are
calling is busy and has no Call Waiting feature enabled, the Call Repeat function allows you
to connect t o the busy number when the line becomes free.
