26
If you choose 64-bit WEP as your WEP encryption length, enter 5 ASCII characters or 10
hexadecimal characters (“0-9”, “A-F”) for each Key (1~4). If you choose 128-bit WEP,
enter 13 ASCII characters or 26 hexadecimal characters (“0-9”, “A-F”) fro each Key (1~4).
2. Shared:
When
“Shared”
is selected, WEP encryption type will be enabled at the same
time.
WEP Encryption Length:
Select either 64-bit WEP or 128-bit WEP. 128-bit WEP
requires a longer key than 64-bit WEP. Your wireless clients must have the same WEP
encryption length as this Wireless Router; otherwise, the connection will not be
established.
Key 1 ~ 4:
Enter values for Key 1 to Key 4 with either HEX or ASCII characters.
If you choose 64-bit W EP as your WEP encryption length, Enter 5 ASCII characters or
10 hexadecimal characters (“0-9”, “A-F”) for each Key (1~4). If you choose 128-bit WEP,
enter 13 ASCII characters or 26 hexadecimal characters (“0-9”, “A-F”) fro each Key (1~4).
3. WPA:
WPA stands for Wi-Fi Protected Access and intends to improve the security
functions of WEP by using two security-enhanced types to encrypt data, these are: TKIP
(Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard).
Encryption type:
Select either
“TKIP”
or
“AES”
(AES is a stronger encryption method
than TKIP).
