23
LAN Settings
LAN IP Address:
Specify a unique IP address for this WLAN VoIP Residential Gateway in
LAN.
Subnet Mask:
Specify the subnet mask to be used with the WLAN VoIP Residential
Gateway IP address. The available subnet mask values are listed from the pull-down menu.
Options include 255.255.255.0, 255.255.255.128, 255.255.255.192, 255.255.255.224,
255.255.255.240, 255.255.255.248, 255.255.255.252.
DNS Proxy:
Tick this checkbox if you would like to relay clients’ DNS requests to a real DNS
server IP address.
DHCP Server Settings
DHCP
(Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure this
gateway as a DHCP server or disable it. When the gateway is configured as a server, it
provides the TCP/IP configuration for clients. If DHCP service is disabled, you must have
another DHCP server on your LAN; otherwise, the computer must be manually configured.
Tick
“DHCP server”
checkbox
to
enable or disable the DHCP server. If
Enable
is checked
and a DHCP server is available on the network, the WLAN VoIP Residential Gateway will
automatically get the IP address from the DHCP server. Otherwise (Disabled), the user
needs to specify the IP address, Subnet Mask and Gateway. When DHCP is used, the
following items need to be set as well.
Start IP Address:
The starting IP address which can be assigned to this WLAN VoIP
Residential Gateway when a DHCP server is enabled and available on the network.
End IP Address:
The ending IP address which can be assigned to this WLAN VoIP
Residential Gateway when a DHCP server is enabled and available on the network.
DHCP Leased Time:
Enter the length of lease time in seconds for the automatically-
assigned IP address. When the leased time is expired, the user has to get the automatically-
assigned IP address from the DHCP server again.
Click the
“Submit”
button to make your settings effective.
Click the
“Reset”
button to clear settings that you have entered.
NOTE:
This WLAN VoIP Residential Gateway also supports DHCP auto-provisioning
function that enables DHCP clients to automatically download the latest Firmware and
Configuration image. For information about how to set up a DHCP server, please refer to
Appendix A.
