53
Inter-digit Timeout:
Specify Inter-digit timeout in seconds. This is the time value allowed
between two digits that are entered.
First-digit Timeout:
Specify time for First-digit timeout in seconds. When the user picks up
the handset without dialing a call within the specified time, then the dialing tone will be
changed to busy tone.
Transfer Key:
Select the key from the drop-down menu. When hook flash is pressed on a
call, the transfer key will be activated and a call will be transferred by pressing the selected
key(s). You can follow the procedures below to transfer a call.
Press FlashHook and then dial “
＊＊
” followed by the phone number of the
called party.
After the connection is established with the called party, press “
＊
#” to transfer
the original call to the called party. The called party has to press FlashHook to
start a conversation with the original caller.
For example:
Press
FlashHook
Dial “
＊＊
”
Dial the no. of
the called party
Dial “
＊
#”
The called
party presses
FlashHook
New Call key:
Select the key from the drop-down menu. When hook flash is pressed on a
call, the new call key will be activated and a new call will be dialed by pressing the selected
key(s).
Three Way Conference key:
Select the key from the drop-down menu. When hook flash is
pressed on a call, the three-way conference key will be activated and a three way
conference call will be initiated by pressing the selected key(s). You can follow the
procedures below to begin a three-way conversation.
Dial the number of the first conferee. After the connection is established, ask the
first conferee to hold.
Press FlashHook and then dial “
＊＊
” followed by the phone number of the
second conferee.
After the connection is established with the second conferee, press “
＊
3” to
initiate a three-way conversation.
For example:
Dial the no. of
the first
conferee
Press
FlashHook
Dial “
＊＊
”
Dial the no. of
the second
conferee
Dial “
＊
3”
Hold Call Key:
Select the key from the drop-down menu. When hook flash is pressed on a
call, the hold call key will be activated and a call will be on hold by pressing the selected
key(s). The function of hold call key is the same as FlashHook.
