41
2.5.3 Configure VLAN
Select
Configure VLAN
from the
Switch Management
menu,
then
Configure VLAN
screen page appears.
Default VLAN VID:
Specify a default VID number (1~4095) to each port.
Ingress Double Tag:
Enable (Ingress Double Tag) or Disable (Ingress Un-Double tag) for
VLAN. The WLAN VoIP Residential Gateway supports Q-in-Q (Double tag tunneling) for
security via robust isolation of customer traffic and unburdening the service provider from
configuration management of CPE.
VLAN Forwarding Table
VID:
Specify a VID for new VLAN rule.
NOTE:
By default, there are two VLANs in the VLAN Forwarding table; VLAN 1 is for
WAN, VLAN 2 is for LAN. When you select your desired
“NAT/Bridge Mode”
in
WAN
Settings
, the settings in VLAN 1 and VLAN2 will be changed accordingly and
automatically.
P-Bit:
Select a priority value from the pull-down menu for this VLAN rule.
Port .1 ~ CPU:
T (Tag, a member in this VLAN rule), U (Un-tag, a member in this VLAN
rule), – (Not a member in this VLAN rule).
In every VLAN forwarding rule, CPU is included as a member (U, Un-tag) which means that
the traffic from the designated VLAN can go through the WLAN VoIP Residential Gateway
CPU.
Click the
“Insert”
button to add this new rule to the VLAN table below after you enter the
new VID and select appropriate settings from the pull-down menu
Click the
“Edit”
button on the VLAN rule that you would like to make some changes. When
the selected port is highlighted in blue, users can make some changes by selecting from the
pull-down menu.
