52
2.8.4 FAX Setting
Select
FXS port setting
from the
VoIP Management
menu,
then
FXS port setting
screen
page appears.
Line 1 & 2 T.38 Option:
Select the T.38 FAX option from the pull-down menu.
Voice:
When “Voice” is selected, voice data will be transmitted in accordance with
CODEC priority defined in
Voice Setting
.
T.38 FAX Relay:
Select “T.38 FAX Relay” option, if you would like to send fax
messages as UDP or TCP/IP packets. This provides better quality; however, the peer
device must use T.38 as well.
Voice and T.38 Relay:
When this option is selected, voice will be transmitted with
the defined CODEC priority and fax messages will be sent with T.38.
Voice and Fax Pass Through:
When this option is selected, voice will be
transmitted with the defined CODEC priority and fax messages will be sent with
G.711/Ulaw.
2.8.5 General Dialing Setting
Select
General Dialing setting
from the
VoIP Management
menu,
then
General Dialing
setting
screen page appears.
