56
2.9 CATV Setting (Only available for RF module)
Select
CATV Setting
, then
CATV Settings
screen page appears.
CATV Setting:
The default setting of CATV-RF module is enabled. Select “Disable” from
the pull-down menu to disable CATV-RF module.
2.10 Management
In this session you’ll be able to setup web management authority, username and password
for the authentication of configuration and maintenance, and upgrade firmware.
Select
Management
from the
Main Menu,
the sub-items –
Administrator Account, Date /
Time, Ping test, Save / Restore, Factory Default,
and
Firmware Update
- will show up.
2.10.1 Administrator Account
Select
Administrator Account
from the
Management
menu, then
Administrator Account
screen page appears.
Administrator Name:
Specify the authorized user login name, up to 31 alphanumeric
characters. The default value is “admin”.
Administrator Password:
Enter the desired user password.
Confirm Password:
Re-type the desired user password to confirm.
NOTE:
When you set up your new administrator name and password to login to Web
Management, please remember login information by heart or keep it in a safe place. If you
forget your login information and every login retry fails, you can press the Diag. button for
about 10 seconds to reset the device to factory defaults. In this way, you can use the
default login information to login to Web Management.
