Comtrol RocketLinx MP1204-XT User Manual Download

Page: 96 / 414

96 - Configuration Pages

RocketLinx MP1204-XT User Guide

: 2000644 Rev. A

Security | Network | ACL | Access Control List

Ethernet

Specify whether frames can hit the action according to their ARP/RARP protocol address
space (PRO) settings.

•

: ARP/RARP frames where the PRO is not equal to IP (0x800).

•

: ARP/RARP frames where the PRO is equal to IP (0x800).

•

Any

: Any value is allowed (

don't-care

IP Parameters

IP Protocol
Filter

Specify the IP protocol filter for this ACE.

•

Any

: No IP protocol filter is specified (

don't-care

•

Specific

: If you want to filter a specific IP protocol filter with this ACE, choose this

value. A field for entering an IP protocol filter appears.

•

ICMP

: Select

ICMP

to filter IPv4 ICMP protocol frames. Extra fields for defining ICMP

parameters will appear. These fields are explained later in this help file.

•

UDP

: Select

UDP

to filter IPv4 UDP protocol frames. Extra fields for defining UDP

parameters will appear. These fields are explained later in this help file.

•

TCP

: Select

TCP

to filter IPv4 TCP protocol frames. Extra fields for defining TCP

parameters will appear. These fields are explained later in this help file.

IP Protocol
Value

When

Specific

is selected for the IP protocol value, you can enter a specific value. The

allowed range is 0 to 255. A frame that hits this ACE matches this IP protocol value.

IP TTL

Specify the

Time-to-Live

settings for this ACE.

•

zero

: IPv4 frames with a

Time-to-Live

field greater than zero must not be able to match

this entry.

•

non-zero

: IPv4 frames with a

Time-to-Live

field greater than zero must be able to match

this entry.

•

Any

: Any value is allowed (

don't-care

IP Fragment

Specify the fragment offset settings for this ACE. This involves the settings for the More
Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame.

•

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than

zero must not be able to match this entry.

•

Yes

: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than

zero must be able to match this entry.

•

Any

: Any value is allowed (

don't-care

IP Option

Specify the options flag setting for this ACE.

•

: IPv4 frames where the options flag is set must not be able to match this entry.

•

Yes

: IPv4 frames where the options flag is set must be able to match this entry.

•

Any

: Any value is allowed (

don't-care

SIP Filter

Specify the source IP filter for this ACE.

•

Any

: No

Source IP Filter

is specified. (

Source IP Filter

don't-care

•

Host

Source IP Filter

is set to

Host

. Specify the source IP address in the

SIP Address

field

that appears.

•

Network

Source IP Filter

is set to

Network

. Specify the source IP address and source IP

mask in the

SIP Address

and

SIP Mask

fields that appear.

Item

Configuration (Continued)

Summary of Contents for RocketLinx MP1204-XT































































































































































































































































































































































































































Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands

Comtrol RocketLinx MP1204-XT, User Manual

Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands