66 - Configuration Pages
RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Security | Switch | SNMP | Users
Security | Switch | SNMP | Users
Configure the SNMPv3 user table on this page. The entry index keys are
Engine ID
and
User Name
.
Item
Configuration | Security| Switch | SNMP | Users
Delete
Check to delete the entry. It is deleted during the next save.
Engine ID
An octet string identifying the engine ID to which this entry should belong. The string
must contain an even number (in hexadecimal format) with number of digits between 10
and 64, but all-zeros and all-'F's are not allowed.
The SNMPv3 architecture uses the User-based Security Model (USM) for message
security and the View-based Access Control Model (VACM) for access control. For the
USM entry, the
usmUserEngineID
and
usmUserName
are the entry's keys. In a simple
agent,
usmUserEngineID
is always that agent's own
snmpEngineID
value. The value can
also take the value of the
snmpEngineID
of a remote SNMP engine with which this user
can communicate. In other words, if the user engine ID equals the system engine ID
then it is a local user; otherwise it's a remote user.
User name
A string identifying the user name to which this entry should belong. The allowed string
length is 1 to 32 and the allowed content is ASCII characters from 33 to 126.
Security Level
Indicates the security model to which this entry should belong. Possible security modes
are:
•
NoAuth, NoPriv
: No authentication and no privacy.
•
Auth, NoPriv
: Authentication and no privacy.
•
Auth, Priv
: Authentication and privacy.
The value of security level cannot be modified if entry already exists. That means it
must first be ensured that the value is set correctly.
Authentication
Protocol
Indicates the authentication protocol to which this entry should belong. Possible
authentication protocols are:
•
None
: No authentication protocol.
•
MD5
: An optional flag to indicate that this user uses MD5 authentication protocol.
•
SHA
: An optional flag to indicate that this user uses SHA authentication protocol.
The value of security level cannot be modified if entry already exists. That means must
first ensure that the value is set correctly.
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
