Comtrol RocketLinx MP1204-XT, User Manual

Page: 148 / 414

148 - Configuration Pages RocketLinx MP1204-XT User Guide : 2000644 Rev. A
Private VLANs | Port Isolation
Private VLANs | Port Isolation
This page is used for enabling or disabling port isolation on ports in a Private VLAN.
A port member of a VLAN can be isolated to other isolated ports on the same VLAN and Private VLAN.
Configuration | VCL Menu
The following menus or pages are under the VCL menu.
• VCL | MAC-Based VLAN on Page 149
• VCL | Protocol-Based VLAN Menu on Page 150
• VCL | IP Subnet-Based VLAN on Page 152
Click the
Add New Private VLAN
button to add a new private VLAN ID. An empty row is
added to the table, and the private VLAN can be configured as needed. The allowed
range for a private VLAN ID is the same as the switch port number range. Any values
outside this range are not accepted, and a warning message appears. Click
OK
to
discard the incorrect entry, or click
Cancel
to return to the editing and make a correction.
The Private VLAN is enabled when you click Save .
The
Delete
button can be used to undo the addition of new Private VLANs.
Item Configuration | Private VLANs | Port Isolation
Port
Members
A check box is provided for each port of a private VLAN.
When checked, port isolation is enabled on that port.
When unchecked, port isolation is disabled on that port.
By default, port isolation is disabled on all ports.
Buttons
• Check the Auto-refresh box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
• Click the
Refresh
button to refresh the page immediately.
• Click the Save button to save changes.
• Click the
Reset
button to undo any changes made locally and revert to previously
saved values.
Item Configuration | Private VLANs | Membership (Continued)