RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Configuration Pages - 109
Aggregation | LACP
Aggregation | LACP
Use this page to inspect the current LACP port configuration and if necessary, make changes.
Aggregation Group Configuration
Group ID
Indicates the group ID for the settings contained in the same row. Group
ID Normal indicates there is no aggregation. Only one group ID is valid
per port.
Port
Members
Each switch port is listed for each group ID. Select a radio button to
include a port in an aggregation, or clear the radio button to remove the
port from the aggregation. By default, no ports belong to any aggregation
group. Only full-duplex ports can join an aggregation and ports must be
in the same speed in each group.
Item
Aggregation | LACP
Port
The MP1204-XT port number.
LACP
Enabled
Controls whether LACP is enabled on the MP1204-XT port. LACP forms
an aggregation when two or more ports are connected to the same partner.
Key
The
Key
value incurred by the port, range 1-65535. The Auto setting sets
the key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2,
1Gb = 3. Using the
Specific
setting, a user-defined value can be entered.
Ports with the same
Key
value can participate in the same aggregation
group, while ports with different keys cannot.
Item
Configuration | Aggregation | Static (Continued)
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
