Comtrol RocketLinx MP1204-XT, User Manual

Page: 286 / 414

286 - Command Line Interface (CLI) RocketLinx MP1204-XT User Guide : 2000644 Rev. A
Enable Mode Commands
show sflow
show snmp
Description Sflow information
Syntax
show sflow
show sflow statistics { receiver [ <rcvr_idx_list> ] | samplers [ interface
[ <samplers_list> ] ( <port_type> [ <v_port_type_list> ] ) ] }
Parameters
Name Description
receiver Show statistics for receiver
samplers Show statistics for samplers
interface Interface
port_type GigabitEthernet, 1 Gigabit Ethernet Port
v_port_type_list <port_type_list> Port list in 1/1-14
Description SNMP information
Syntax
show snmp
show snmp access [ <group_name> { v1 | v2c | v3 | any } { auth | noauth | priv } ]
show snmp community v3 [ <community> ]
show snmp host [ <conf_name> ] [ system ] [ switch ] [ interface ] [ aaa ]
show snmp mib context
show snmp mib ifmib ifIndex
show snmp security-to-group [ { v1 | v2c | v3 } <security_name> ]
show snmp user [ <username> <engineID> ]
show snmp view [ <view_name> <oid_subtree> ]
Parameters
Name Description
access access configuration
group_name <GroupName : word32> group name
any any security model
v1 v1 security model
v2c v2c security model
v3 v3 security model
auth authNoPriv Security Level
noauth noAuthNoPriv Security Level
priv authPriv Security Level
community Community
community <Community : word127> Specify community name
host Set SNMP host's configurations