Comtrol RocketLinx MP1204-XT User Manual Download

Page: 221 / 414

RocketLinx MP1204-XT User Guide

: 2000644 Rev. A

Monitor Pages - 221

Aggregation | LACP | System Status

This page provides a status overview for all LACP instances.

Aggregation | LACP | Port Status

This page provides a status overview for LACP status for all ports.

Object

Description

Aggr ID

The Aggregation ID associated with this aggregation instance. For
LLAG the id is shown as

isid:aggr-id

and for GLAGs as

aggr-id

Partner
System ID

The system ID (MAC address) of the aggregation partner.

Partner Key

The Key that the partner has assigned to this aggregation ID.

Last Changed

The time since this aggregation changed.

Local Ports

Shows which ports are a part of this aggregation for this switch.

Summary of Contents for RocketLinx MP1204-XT































































































































































































































































































































































































































Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands

Comtrol RocketLinx MP1204-XT, User Manual

Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands