Comtrol RocketLinx MP1204-XT User Manual Download

Page: 228 / 414

228 - Monitor Pages

RocketLinx MP1204-XT User Guide

: 2000644 Rev. A

MVR | MVR Channel Groups

Each page shows up to 99 entries from the MVR Group table, default being 20, selected through the

entries per

page

input field. When first visited, the page shows the first 20 entries from the beginning of the MVR

Channels (Groups) Information Table.

The

Start from VLAN

, and

Group Address

input fields allows you to select the starting point in the MVR

Channels (Groups) Information Table.

Clicking the

Refresh

button updates the displayed table starting from that or the closest next MVR Channels

(Groups) Information Table match. In addition, the two input fields will - upon a

Refresh

button click - assume

the value of the first displayed entry, allowing for continuous refresh with the same start address.

The

uses the last entry of the currently displayed table as a basis for the next lookup.

When the end is reached the text

No more entries

is shown in the displayed table.

Use the

button to start over.

Item

Monitor | MVR | MVR Channel Groups

VLAN ID

VLAN ID of the group.

Groups

Group ID of the group displayed.

Port Members

Ports under this group.

Summary of Contents for RocketLinx MP1204-XT































































































































































































































































































































































































































Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands

Comtrol RocketLinx MP1204-XT, User Manual

Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands