RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Configuration Pages - 93
Security | Network | ACL | Access Control List
Action
Specify the action to take with a frame that hits this ACE.
•
Permit
: The frame that hits this ACE is granted permission for the ACE operation.
•
Deny
: The frame that hits this ACE is dropped.
•
Filter
: Frames matching the ACE are filtered.
Rate Limiter
Specify the rate limiter in number of base units. The allowed range is 1 to 16.
Disabled
indicates that the rate limiter operation is disabled.
Port
Redirect
Frames that hit the ACE are redirected to the port number specified here. The rate limiter
affects these ports. The allowed range is the same as the switch port number range.
Disabled
indicates that the port redirect operation is disabled and the specific port number
of
Port Redirect
cannot be set when action is permitted.
Mirror
Specify the mirror operation of this port. Frames matching the ACE are mirrored to the
destination mirror port. The rate limiter does not affect frames on the mirror port. The
allowed values are:
•
Enabled
: Frames received on the port are mirrored.
•
Disabled
: Frames received on the port are not mirrored.
The default value is
Disabled
.
Logging
Specify the logging operation of the ACE. Notice that the logging message does not include
the 4 bytes CRC information. The allowed values are:
•
Enabled
: Frames matching the ACE are stored in the System Log.
•
Disabled
: Frames matching the ACE are not logged.
Note:
The logging feature only works when the packet length is less than 1518 (without
VLAN tags) and the System Log memory size and logging rate are limited.
Shutdown
Specify the port shut down operation of the ACE. The allowed values are:
•
Enabled
: If a frame matches the ACE, the ingress port is disabled.
•
Disabled
: Port shut down is disabled for the ACE.
Note:
The shutdown feature only works when the packet length is less than 1518 (without
VLAN tags).
Counter
The counter indicates the number of times the ACE was hit by a frame.
MAC Parameters
SMAC Filter
Note:
Only displayed when the frame type is Ethernet Type or ARP.
Specify the source MAC filter for this ACE.
•
Any
: No SMAC filter is specified. (SMAC filter status is
don't-care
.)
•
Specific
: If you want to filter a specific source MAC address with this ACE, choose this
value. A field for entering an SMAC value appears.
SMAC Value
When
Specific
is selected for the SMAC filter, you can enter a specific source MAC address.
The legal format is xx-xx-xx-xx-xx-xx or xx.xx.xx.xx.xx.xx or xxxxxxxxxxxx (x is a
hexadecimal digit). A frame that hits this ACE matches this SMAC value.
Item
Configuration | Security | Network | ACL | Access Control List | ACE
Configuration (Continued)
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
