RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Configuration Pages - 137
LLDP | LLDP-MED
Place type
Place type - Example: Office.
Postal
community
name
Postal community name - Example: Leonia.
P.O. Box
Post office box (P.O. BOX) - Example: 12345.
Additional code
Additional code - Example: 1320300003.
Emergency Call Service
Emergency
Call Service
Emergency Call Service
ELIN identifier data format is defined to carry the ELIN
identifier as used during emergency call setup to a traditional CAMA or ISDN trunk-
based PSAP. This format consists of a numerical digit string, corresponding to the ELIN
to be used for emergency calling.
Policies
Delete
Check to delete the policy. It is deleted during the next save.
Policy ID
ID for the policy. This is auto generated and shall be used when selecting the policies
that shall be mapped to the specific ports.
Application
Type
Intended use of the application types:
1.
Voice
- for use by dedicated IP Telephony handsets and other similar appliances
supporting interactive voice services. These devices are typically deployed on a
separate VLAN for ease of deployment and enhanced security by isolation from data
applications.
2.
Voice Signaling
(conditional) - for use in network topologies that require a different
policy for the voice signaling than for the voice media. This application type should
not be advertised if all the same network policies apply as those advertised in the
Voice application policy.
3.
Guest Voice
- support a separate 'limited feature-set' voice service for guest users and
visitors with their own IP Telephony handsets and other similar appliances
supporting interactive voice services.
4.
Guest Voice Signaling
(conditional) - for use in network topologies that require a
different policy for the guest voice signaling than for the guest voice media. This
application type should not be advertised if all the same network policies apply as
those advertised in the Guest Voice application policy.
5.
Softphone Voice
- for use by softphone applications on typical data centric devices,
such as PCs or laptops. This class of endpoints frequently does not support multiple
VLANs, if at all, and are typically configured to use an 'untagged' VLAN or a single
'tagged' data specific VLAN. When a network policy is defined for use with an
'untagged' VLAN (see Tagged flag below), then the L2 priority field is ignored and
only the DSCP value has relevance.
6.
Video Conferencing
- for use by dedicated Video Conferencing equipment and other
similar appliances supporting real-time interactive video/audio services.
7.
Streaming Video
- for use by broadcast or multicast based video content distribution
and other similar applications supporting streaming video services that require
specific network policy treatment. Video applications relying on TCP with buffering
would not be an intended use of this application type.
8.
Video Signaling
(conditional) - for use in network topologies that require a separate
policy for the video signaling than for the video media. This application type should
not be advertised if all the same network policies apply as those advertised in the
Video Conferencing application policy.
Item
Configuration | LLDP | LLDP-MED (Continued)
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
