RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Maintenance Pages - 263
Using the CLI to Reset the Default Settings
5.
Click
Maintenance | Configuration | Save startup-config
and then click the
Save Configuration
button.
Using the CLI to Reset the Default Settings
You can choose to reset:
•
MP1204-XT configuration
excluding IP configuration settings
•
All of the configuration settings
(
)
Use this procedure to reset the
configuration to default settings but
keep the IP settings.
1.
Access the CLI using the console
port or telnet.
2.
Type
reload defaults keep-ip
3.
Check the interface VLAN and IP
address to confirm only
management IP setting kept by
entering these commands:
•
show int vlan 1
•
show vlan
•
show int vlan 1
4.
Save the new settings to the flash
by entering:
copy running-config
startup-config
To reset the all configuration to default completely including the IP configuration settings:
1.
Access the CLI using the console port or telnet.
2.
Enter:
reload defaults
3.
Check the interface VLAN and IP address and confirm that they all changed to default settings.
4.
Save the new settings to the flash by entering:
copy running-config startup-config
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
