Comtrol RocketLinx MP1204-XT, User Manual

Page: 126 / 414

126 - Configuration Pages RocketLinx MP1204-XT User Guide : 2000644 Rev. A
IPMC | IGMP Snooping | Port Filtering Profile
IPMC | IGMP Snooping | Port Filtering Profile
Use this page to configure a Port Filtering Profile for IGMP Snooping.
QRI
Query Response Interval (QRI) is the Maximum Response Delay used to calculate the
Maximum Response Code inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of seconds, default query response interval
is 100 in tenths of seconds (10 seconds).
LLQI (LMQI for
IGMP)
LLQI is the Last Member Query Time, which is the time value represented by the
Last Member Query Interval, multiplied by the Last Member Query Count.
The allowed range is 0 to 31744 in tenths of seconds, default last member query
interval is 10 in tenths of seconds (1 second).
URI
URI is the Unsolicited Report Interval, which is the time between repetitions of a
host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report interval is 1
second.
Click to add a new IGMP VLAN. Specify the VID and configure the new entry and
then click Save. The specific VLAN starts working after the corresponding static
VLAN is also created.
Item Configuration | IPMC | IGMP Snooping | Port Filtering Profile
Port The logical port for the settings.
Filtering Profile
Select the IPMC Profile as the filtering condition for the specific port. a
summary about the designated profile is shown by clicking the view button.
Profile
Management
Button
You can inspect the rules of the designated profile by using the following
button:
View the list of the rules associated with the designated profile.
Item Configuration | IPMC | IGMP Snooping | VLAN Configuration (Continued)