80 - Configuration Pages
RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Security | Network | NAS
Hold Time
This setting applies to the following modes, that is, modes using the Port Security
functionality to secure MAC addresses:
•
Single 802.1X
•
Multi 802.1X
•
MAC-Based Auth
If a client is denied access - either because the RADIUS server denies the client
access or because the RADIUS server request times out (according to the timeout
specified on the
Configuration | Security | AAA
page) - the client is put on hold in the
Unauthorized state. The hold timer does not count during an on-going
authentication.
In MAC-based Auth mode, the MP1204-XT ignores new frames coming from the
client during the hold time.
The
Hold Time
can be set to a number between 10 and 1000000 seconds.
RADIUS-Assigned
QoS Enabled
RADIUS-assigned QoS provides a means to centrally control the traffic class to
which traffic coming from a successfully authenticated supplicant is assigned on
the switch. The RADIUS server must be configured to transmit special RADIUS
attributes to take advantage of this feature (see
RADIUS-Assigned QoS Enabled
below for a detailed description).
The
RADIUS-Assigned QoS Enabled
check box provides a quick way to globally
enable/disable RADIUS-server assigned QoS Class functionality. When checked,
the individual ports copy settings determined whether
RADIUS-assigned QoS Class
is enabled on that port. When unchecked,
RADIUS-server assigned QoS Class
is
disabled on all ports.
RADIUS-Assigned
VLAN Enabled
RADIUS-assigned VLAN provides a means to centrally control the VLAN on
which a successfully authenticated supplicant is placed on the switch. Incoming
traffic is classified to and switched on the RADIUS-assigned VLAN. The RADIUS
server must be configured to transmit special RADIUS attributes to take
advantage of this feature (see
RADIUS-Assigned VLAN Enabled
below for a detailed
description).
The
RADIUS-Assigned VLAN Enabled
check box provides a quick way to globally
enable/disable RADIUS-server assigned VLAN functionality. When checked, the
individual ports copy settings determined whether
RADIUS-assigned VLAN
is
enabled on that port. When unchecked,
RADIUS-server assigned VLAN
is disabled
on all ports.
Guest VLAN
Enabled
A
Guest VLAN
is a special VLAN - typically with limited network access - on which
802.1X-unaware clients are placed after a network administrator-defined timeout.
The MP1204-XT follows a set of rules for entering and leaving the Guest VLAN as
listed below.
The
Guest VLAN Enabled
check box provides a quick way to globally enable/disable
Guest VLAN functionality. When checked, the individual ports copy settings
determined whether the port can be moved into Guest VLAN. When unchecked,
the ability to move to the Guest VLAN is disabled on all ports.
Guest VLAN ID
This is the value that a ports
Port VLAN ID
is set to if a port is moved into the
Guest VLAN. It is only changeable if the Guest VLAN option is globally enabled.
Valid values are in the range [1; 4095].
Max. Reauth. Count
The number of times the MP1204-XT transmits an EAPOL Request Identity frame
without response before considering entering the Guest VLAN is adjusted with
this setting. The value can only be changed if the
Guest VLAN
option is globally
enabled.
Valid values are in the range [1; 255].
Item
Configuration | Security | Network | NAS (Continued)
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
