Comtrol RocketLinx MP1204-XT, User Manual

Page: 308 / 414

308 - Command Line Interface (CLI) RocketLinx MP1204-XT User Guide : 2000644 Rev. A
Configure Mode Commands
frame-sizes
green-etherneteee
green-etherneteee optimize-for-power
green-etherneteee urgent-queues
Description Select the frame sizes that the enabled tests will loop through
Syntax frame-sizes { [ 64 ] [ 128 ] [ 256 ] [ 512 ] [ 1024 ] [ 1280 ] [ 1518 ] [ 2000 ] [ 9600 ] }
Parameters
Name Description
64 Enable testing with 64-byte TST PDUs
128 Enable testing with 128-byte TST PDUs
256 Enable testing with 256-byte TST PDUs
512 Enable testing with 512-byte TST PDUs
1024 Enable testing with 1024-byte TST PDUs
1280 Enable testing with 1280-byte TST PDUs
1518 Enable testing with 1518-byte TST PDUs
2000 Enable testing with 2000-byte TST PDUs
9600 Enable testing with 9600-byte TST PDUs
Description Powering down of PHYs when there is no traffic.
Syntax green-etherneteee
Parameter None
Description
Set if EEE shall be optimized for least power
consumption (else optimized for least traffic latency).
Syntax green-etherneteee optimize-for-power
Parameter None
Description
Enables EEE urgent queue. An urgent queue means that latency is kept to a
minimum for traffic goin to that queue. Note: EEE power savings will be reduced.
Syntax green-etherneteee urgent-queues [ <range_list> ]
Parameter
Name Description
range_list EEE Interface.