RocketLinx MP1204-XT User Guide
: 2000644 Rev. A
Configuration Pages - 59
Security | Switch | Access Management
Security | Switch | Access Management
Configure access management table on this page. The maximum number of entries is 16. If the application's
type matches any one of the access management entries, it allows access to the MP1204-XT.
Item
Configuration | Security| Switch | Access Management
Mode
Indicates the access management mode operation. Possible modes are:
•
Enabled
: Enable access management mode operation.
•
Disabled
: Disable access management mode operation.
Delete
Check to delete the entry. It is deleted during the next save.
VLAN ID
Indicates the VLAN ID for the access management entry.
Start IP address
Indicates the start IP address for the access management entry.
End IP address
Indicates the end IP address for the access management entry.
HTTP/HTTPS
Indicates that the host can access the MP1204-XT from HTTP/HTTPS interface
if the host IP address matches the IP address range provided in the entry.
SNMP
Indicates that the host can access the MP1204-XT from SNMP interface if the
host IP address matches the IP address range provided in the entry.
TELNET/SSH
Indicates that the host can access the MP1204-XT from TELNET/SSH interface
if the host IP address matches the IP address range provided in the entry.
Click to add a new access management entry.
Summary of Contents for RocketLinx MP1204-XT
Page 28: ...28 Installing the Hardware RocketLinx MP1204 XT User Guide 2000644 Rev A System Reset ...
Page 36: ...36 Web Interface Overview RocketLinx MP1204 XT User Guide 2000644 Rev A Ending a Session ...
Page 180: ...180 Configuration Pages RocketLinx MP1204 XT User Guide 2000644 Rev A Configuration DDMI ...
Page 414: ...414 Glossary RocketLinx MP1204 XT User Guide 2000644 Rev A Y ...
