Comtrol RocketLinx MP1204-XT User Manual Download

Page: 197 / 414

RocketLinx MP1204-XT User Guide

: 2000644 Rev. A

Monitor Pages - 197

DHCP | Relay Statistics

This page provides statistics for DHCP relay.

IP Subnet Mask

User IP subnet mask of the entry.

DHCP Server Address

DHCP Server address of the entry.

Item

Monitor | DHCP | Relay Statistics

Server Statistics

Transmit to Server

The number of packets that are relayed from client to server.

Transmit Error

The number of packets that resulted in errors while being sent to clients.

Receive from Server

The number of packets received from server.

Receive Missing Agent
Option

The number of packets received without agent information options.

Receive Missing
Circuit ID

The number of packets received with the Circuit ID option missing.

Receive Missing
Remote ID

The number of packets received with the Remote ID option missing.

Receive Bad Circuit ID

The number of packets whose Circuit ID option did not match known circuit ID.

Receive Bad Remote
ID

The number of packets whose Remote ID option did not match known Remote ID.

Client Statistics

Transmit to Client

The number of relayed packets from server to client.

Transmit Error

The number of packets that resulted in error while being sent to servers.

Receive from Client

The number of received packets from server.

Item

Monitor | DHCP | Snooping Table

Summary of Contents for RocketLinx MP1204-XT































































































































































































































































































































































































































Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands

Comtrol RocketLinx MP1204-XT, User Manual

Search results

Summary of Contents for RocketLinx MP1204-XT

Reviews:

Related manuals for RocketLinx MP1204-XT

Brands by name

Popular brands