Comtrol RocketLinx MP1204-XT User Manual Download | Manualshive

Page: 149 / 414

background image

RocketLinx MP1204-XT User Guide

: 2000644 Rev. A

Configuration Pages - 149

VCL | MAC-Based VLAN

VCL | MAC-Based VLAN

The MAC-based VLAN entries can be configured here. This page allows for adding and deleting MAC-based
VLAN entries and assigning the entries to different ports. This page shows only static entries.

Item

Configuration | VCL | MAC-Based VLAN

Delete

To delete a MAC-based VLAN entry, check this box and press save. The entry is
deleted in the stack.

MAC Address

Indicates the MAC address.

VLAN ID

Indicates the VLAN ID.

Port Members

A row of check boxes for each port is displayed for each MAC-based VLAN entry.
To include a port in a MAC-based VLAN, check the box. To remove or exclude
the port from the MAC-based VLAN, make sure the box is unchecked. By
default, no ports are members, and all boxes are unchecked.

Click the

Add New Entry

button to add a new MAC-based VLAN entry. An

empty row is added to the table, and the MAC-based VLAN entry can be
configured as needed. Any unicast MAC address can be configured for the MAC-
based VLAN entry. No broadcast or multicast MAC addresses are allowed.
Legal values for a VLAN ID are 1 through 4095.

The MAC-based VLAN entry is enabled when you click the

Save

button. A MAC-

based VLAN without any port members is deleted when you click

Save

.

The

Delete

button can be used to undo the addition of new MAC-based VLANs.

The maximum possible MAC-based VLAN entries are limited to 256.

Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

Auto-refresh

Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.

Refreshes the displayed table.

Updates the table starting from the first entry in the MAC-based VLAN Table.

Updates the table, starting with the entry after the last entry currently
displayed.

«
...
147
148
149
150
151
...
»

Summary of Contents for RocketLinx MP1204-XT































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RocketLinx MP1204-XT

Brand: Painless Performance Products Pages: 2

Brand: DANLERS Pages: 2

Brand: Jasco Pages: 2

Brand: National Instruments Pages: 23

RMQ-Titan M30 Series

Brand: Eaton Pages: 4

Brand: N-Tron Pages: 132

Brand: Imtex-Controls Pages: 2

Brand: NTI Pages: 15

Brand: Extron electronics Pages: 137

Brand: PABX Pages: 46

Brand: Videplus Pages: 13

Brand: Scame electrical solutions Pages: 68

Brand: CYP Pages: 20

Brand: Abtus Pages: 4

Brand: PortaOne Pages: 78

Valena Life LE-752107

Brand: LEGRAND Pages: 5

AVS-OP-1616-567SD

Brand: AMX Pages: 1

PowerGATE LELTS-1 Series

Brand: Lex Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands