manualshive.com logo in svg

Comnet CNGE20MS, Installation And Operation Manual

Share
Download
Comnet CNGE20MS Installation And Operation Manual Download Page 90

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 90

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Label

Description

ARP/RARP

Specify the available ARP/RARP opcode (OP) flag for this ACE.  
Any: No ARP/RARP OP flag is specified. (OP is “don’t-care”.)  
ARP: Frame must have ARP/RARP opcode set to ARP.  
RARP: Frame must have ARP/RARP opcode set to RARP.  
Other: Frame has unknown ARP/RARP Opcode flag.

Request/Reply

Specify the available ARP/RARP opcode (OP) flag for this ACE.  
Any: No ARP/RARP OP flag is specified. (OP is “don’t-care”.)  
Request: Frame must have ARP Request or RARP Request OP flag set.  
Reply: Frame must have ARP Reply or RARP Reply OP flag.

Sender IP Filter Specify the sender IP filter for this ACE.  

Any: No sender IP filter is specified. (Sender IP filter is “don’t-care”.)  
Host: Sender IP filter is set to Host. Specify the sender IP address in the SIP Address field 
that appears. 
Network: Sender IP filter is set to Network. Specify the sender IP address and sender IP 
mask in the SIP Address and SIP Mask fields that appear.

Sender IP 
Address

When “Host” or “Network” is selected for the sender IP filter, you can enter a specific 
sender IP address in dotted decimal notation.

Sender IP Mask When “Network” is selected for the sender IP filter, you can enter a specific sender IP 

mask in dotted decimal notation.

Target IP Filter

Specify the target IP filter for this specific ACE.  
Any: No target IP filter is specified. (Target IP filter is “don’t-care”.)  
Host: Target IP filter is set to Host. Specify the target IP address in the Target IP Address 
field that appears. Network: Target IP filter is set to Network. Specify the target IP 
address and target IP mask in the Target IP Address and Target IP Mask fields that 
appear.

Target IP Adress When “Host” or “Network” is selected for the target IP filter, you can enter a specific 

target IP address in dotted decimal notation.

Target IP Mask

When “Network” is selected for the target IP filter, you can enter a specific target IP mask 
in dotted decimal notation.

ARP SMAC MatchSpecify whether frames can hit the action according to their sender hardware address 

field (SHA) settings.  
0: ARP frames where SHA is not equal to the SMAC address.  
1: ARP frames where SHA is equal to the SMAC address.  
Any: Any value is allowed (“don’t-care”).

Summary of Contents for CNGE20MS

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands