INS_CNGE24MS-OB(M,S)_REV–
09/12/12 PAGE 56
INSTALLATION AND OPERATION MANUAL
CNGE24MS-OB(M,S)
TECH SUPPORT: 1.888.678.9427
Private VLAN
The Private VLAN membership configurations for the switch can be monitored and modified here.
Private VLANs can be added or deleted here. Port members of each Private VLAN can be added
or removed here. Private VLANs are based on the source port mask, and there are no connections
to VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By
default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple
Private VLANs.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Private VLAN ID Indicates the ID of this particular private VLAN.
Port Members
A row of check boxes for each port is displayed for each private VLAN ID. To include a
port in a Private VLAN, check the box. To remove or exclude the port from the Private
VLAN, make sure the box is unchecked. By default, no ports are members, and all boxes
are unchecked.
Adding a New
Static Entry
Select
Add New Private VLAN
to add a new private VLAN ID. An empty row is added
to the table, and the private VLAN can be configured as needed. The allowed range
for a private VLAN ID is the same as the switch port number range. Any values outside
this range are not accepted, and a warning message appears. Select
OK
to discard the
incorrect entry, or select
Cancel
to return to the editing and make a correction.
The Private VLAN is enabled when you select
Save
.
The
Delete
button can be used to undo the addition of new Private VLANs.
