manualshive.com logo in svg

Comnet CNGE20MS, Installation And Operation Manual

Share
Download
Comnet CNGE20MS Installation And Operation Manual Download Page 112

INS_CNGE24MS-OB(M,S)_REV–

09/12/12     PAGE 112

INSTALLATION AND OPERATION MANUAL 

CNGE24MS-OB(M,S)

TECH SUPPORT: 1.888.678.9427

Traffic Overview

This page provides an overview of general traffic statistics for all switch ports.

Label

Description

Port

The logical port for the settings contained in the same row.

Packets

The number of received and transmitted packets per port.

Bytes

The number of received and transmitted bytes per port.

Errors

The number of frames received in error and the number of incomplete transmissions per 
port.

Drops

The number of frames discarded due to ingress or egress congestion.

Filtered

The number of received frames filtered by the forwarding process.

Auto-Refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Refresh

Updates the counters entries, starting from the current entry ID.

Clear

Flushes all counters entries.

Detailed Statistics

This page provides detailed traffic statistics for a specific switch port. Use the port select box to 
select which switch port details to display.

The displayed counters are the totals for receive and transmit, the size counters for receive and 
transmit, and the error counters for receive and transmit.

Summary of Contents for CNGE20MS

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands