INS_CNGE24MS-OB(M,S)_REV–
09/12/12 PAGE 16
INSTALLATION AND OPERATION MANUAL
CNGE24MS-OB(M,S)
TECH SUPPORT: 1.888.678.9427
WEB Management
Attention: While installing and upgrading firmware, please remove physical loop connection first.
DO NOT power off equipment while the firmware is upgrading!
Configuration by Web Browser
This section details configuration through the Web browser.
About Web-based Management
An embedded HTML web site resides in the flash memory on the CPU board. It contains
advanced management features and allows you to manage the switch from anywhere on the
network through a standard web browser such as Microsoft Internet Explorer.
The Web-Based Management function supports Internet Explorer 5.0 or later. It is based on Java
Applets with an aim to reduce network bandwidth consumption, enhance access speed and
present an easy viewing screen.
Note: By default, IE5.0 or later version does not allow Java Applets to open sockets. You need to
explicitly modify the browser setting in order to enable Java Applets to use network ports.
Preparing for Web Management
The default value is as below:
IP Address:
192.168.10.1
Subnet Mask:
255.255.255.0
Default Gateway:
192.168.10.254
User Name:
admin
Password:
admin
System Login
1. Launch Internet Explorer.
2. Type
http://192.168.10.1
. Press
Enter
.
3. The login screen appears.
4. Key in the username and password. The default username and password is
admin
.
5. Select
Enter
or
OK
button, then the main interface of the Web-based management appears.
