manualshive.com logo in svg

Clarion Ungo Pro Security SR1000, Installation Manual

Share
Download
Clarion Ungo Pro Security SR1000 Installation Manual Download Page 8

8

override switch

IIM

MPPO

ORRTTA

AN

NTT!! When the vehicle is delivered, please show the user where this switch is located and how to dis-

arm the system with it.

Ensure that the location you pick for the switch has sufficient clearance to the rear. The switch should
be well hidden. It should be placed so passengers or stored items (such as in a glove box or center
console) cannot accidentally hit it. The switch fits into a 9/32-inch hole.

This system has Remote Valet. The user can enter and exit valet mode without having to reach the
override switch. This feature was introduced so that switch location was less critical in day-to-day
use. As long as the override switch can be reached to disarm without a remote, easy access is not
important.

status LED

Things to remember when positioning the Status LED:

●

It should be visible from both sides and the rear of the vehicle, if possible.

●

It needs at least 1/2-inch clearance to the rear.

●

It is easiest to remove a small panel, such as a switch blank or a dash bezel, before drilling a
9/32-inch hole.

●

Use quick-disconnects near the LED wires if the panel is removable. This lets mechanics or other
installers remove the panel without cutting the wires.

locations for the optional starter kill relay

If optional starter kill relay or its connections are immediately visible upon removal of the under-dash panel,
they can easily be bypassed. Always make the relay and its connections difficult to discern from the facto-
ry wiring! Exposed yellow butt connectors do not look like factory parts, and will not fool anyone! For this
reason, routing the optional starter kill wires away from the steering column is recommended.

locations for the relay satellite

The relay satellite wiring carries large amounts of current. The wires should not be extended and should
be cut to the minimum length necessary. Since the relay satellite is functioning as the ignition switch in
the vehicle, it is often convenient to mount the relay satellite close to the main ignition switch harness.

Summary of Contents for Ungo Pro Security SR1000
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands