manualshive.com logo in svg

Clarion Ungo Pro Security SR1000, Installation Manual

Share
Download
Clarion Ungo Pro Security SR1000 Installation Manual Download Page 24

24

ORANGE

(+) accessory output

Connect this wire to the accessory wire in the vehicle which powers the climate control system.

PINK

(+) ignition output

Connect this wire to the ignition wire in the vehicle.

PINK/WHITE

(+) second ignition/accessory output

Connect this wire to the second ignition/accessory wire in the vehicle. (See selectable menu feature 2-9.)

N

NO

OTTEE:: For vehicles that do not have a second ignition/accessory wire, this connection is not required.

RED/WHITE

(+) 12V input

If additional current capacity is needed cut this wire, add a fuse adequate for the circuit to be sup-
plied, and connect to an additional 12V source.

4-pin satellite harness wire connection guide

BLUE

(-) status output

For use when immobilizer bypass is required.

ORANGE

(-) 200mA 2nd accessory output

To drive relay for 2nd or 3rd accessory.

VIOLET

(-) 200mA starter output

To drive relay for 2nd starter.

PINK

(-) 200mA 3rd ignition output

To drive relay for 2nd or 3rd ignition.

remote start secondary harness (H3) wire
connection guide

H3/1 BLUE/WHITE

(-) status output

This wire supplies a 200mA output as soon as the module begins the remote start process. The H3/1
BLUE/WHITE wire can also be used to activate the defogger trigger (latched/pulsed) 10-seconds
after the remote start engages. (See the Feature Descriptions section in this guide for details about
programming this output.)

Summary of Contents for Ungo Pro Security SR1000
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands