manualshive.com logo in svg

Clarion Ungo Pro Security SR1000, Installation Manual

Share
Download
Clarion Ungo Pro Security SR1000 Installation Manual Download Page 31

31

ceiver for evaluation. If the code matches a valid code of the system, the vehicle will be allowed to
start. Most of these transponder-based systems can be bypassed using an immobilizer. Some may
require additional parts from the vehicle manufacturer. Consult you dealer for the applications.

plug-in LED and override switch

These plug into the module. The status LED plugs into the small two-pin socket, while the override switch
should be plugged into the larger blue two-pin connector. The status LED fits into a 9/32-inch hole.

Status LED

Override Switch

programmer interface, 3-pin black plug

The black 3-pin port is provided for programming of the unit. The unit can also be programmed
using the Pro Security Programmer. When using the Pro Security Programmer, it is possible to con-
figure any and all of the programmable functions as well as lock the Remote and System Features
Learn Routines so that unauthorized users cannot change the configuration or program remotes to
the unit.

When the program routines have previously been programmed using the Pro Security
Programmer, they may have been locked. Before proceeding with reprogramming the pro-

gram routines, they must be unlocked with the Pro Security Programmer - this cannot be done man-
ually with the override switch.

DIA-41

Summary of Contents for Ungo Pro Security SR1000
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands