Claas LEXION 480, Repair Manual

Page: 341 / 1018

188 678.1 - RHB LEXION 480
5.3.11
Grain tank unloading
Up to serial no. …
From serial no. …
5. Bolt down the cover (D).
(Fig. 24, 28)
6. Align the grain tank cross augers.
The start (A) of the unloading auger (K) flight must
point toward the front cross auger (V).
The start (A) of the front cross auger (V) must be
in the 6 o'clock position.
The start (A) of the rear cross auger (H) must be
in the 12 o'clock position.
F = Direction of travel
(Fig. 33, 34)
7. Installing and adjusting the grain tank unloading
drive chain (17)
, see page 7.2.35
8. Refit the drive wheel and the mud guard.
Removing the horizontal grain tank unloading
auger
If a 90° outlet spout is fitted:
Remove the outlet spout (90°) and the cover.
(Fig. 35)
If a 35° outlet spout is fitted:
Unscrew the outlet spout (35°). Loosen the lock
collar (S) and pull bearing (L) off the shaft completely.
(Fig. 36)
A A
A
F
H
V
K
32832
33
A A
A
F
H
V
K
34709
34
35
36