Claas LEXION 480, Repair Manual

Page: 761 / 1018

188 678.1 - RHB LEXION 480
7.18.25
Final drives
16. Slide on the pre-assembled bearing cover.
ATTENTION!
Avoid damage to the sealing lips of shaft
seal.
☞
Wrap a foil or the like around the shaft.
Tighten up the bearing cover using the special
tool, thereby constantly turning the pinion shaft,
until there is no more play in the shaft. A guide
value of approx.
110 Nm applies.
The spinning torque of the pinion shaft must be
between
1.8 and 3.5 Nm .
Now secure the bearing cover with an expansion
pin.
(Fig. 67, 68, 75)
Special tool:
1 Tube, part no. 181 611.0
2 Socket wrench, part no. 174 048.0
(Fig. 76)
17. Attach the pre-assembled axle housing (22) using
a lifting device.
CAUTION!
A second person is required to guide the axle
housing so that the bearing (23) does not touch
the spur gear (15).
(Fig. 67, 68, 77)
75
32040
1
2
76
77