CTD-N Technical Manual
P/N 95F-6000-00 (February 2017)
page 125
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
SB
Sets the baud rate
Usage
SBnn <CR> or <LF>
Operating Modes
Open
Description
The SB command sets and displays the baud rate of the instrument.
NOTE.
The SB command must be followed by the ***E command to save the setting.
WARNING.
If you change the baud rate of the instrument, you will not be able to
communicate with the instrument until you set the baud rate of your computer to the same.
When setting the baud rate, use the nn format as follows:
15: Sets the baud rate to 115000
57: Sets the baud rate to 57600
38: Sets the baud rate to 38400
19: Sets the baud rate to 19200
96: Sets the baud rate to 9600
12: Sets the baud rate to 1200
30: Sets the baud rate to 300
Returns
See Examples below.
Examples
Enter SB19 <CR> or <LF> The instrument sets and displays the baud rate setting:
Unit now communicates at 19200 baud
See Also
***E
