CTD-N Technical Manual
page 104
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
Entering Commands
To enter a CTD-N command:
1. Choose Start
➤
All Programs
➤
RD Instruments
➤
CTDPro.
CTDPro starts and the CTDPro Main window opens.
2. Choose View
➤
Terminal.
The Terminal window shown in Figure 58 opens.
Figure 58.
The Terminal Window
3. Click anywhere in the Terminal window.
4. Type the command in accordance with the commands listed in Table 16.
For commands that do not set a firmware setting, simply type the command name followed
by the enter key:
Input:
VER
Output:
VER
Firmware Version 4.61
In this example, the VER command is entered, and the firmware version number is output.
For commands that do set firmware settings, typing the command name followed by the enter key
displays the current setting:
Input:
CH0
Output:
CH0=ON
