CTD-N Technical Manual
P/N 95F-6000-00 (February 2017)
page 117
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
DTIME
Displays and sets the delayed start time
Usage
DTIME <CR> or <LF>
Operating Modes
Open
Description
The DTIME command displays and allows you to set the delayed start time of the instrument.
NOTE.
The time set by the DTIME command must be later than the current time and date by
at least one minute.
When setting the delayed start time, use the hh:mm:ss format:
hh:
Hours—01 to 24
mm:
Minutes—00 to 59
ss:
Seconds—00 to 59
Returns
See Examples below.
Examples
Enter DTIME <CR> or <LF>
The instrument displays the current delayed start time and allows you to enter a new time:
Delayed Start Time = 11:25:00
Enter time [hh:mm:ss]:
Enter a <CR><LF> to leave the delayed start time as is, or enter the time in hours, minutes and sec-
onds, and then enter a <CR><LF>.
See Also
DDATE, TIME, DATE
