CTD-N Technical Manual
P/N 95F-6000-00 (February 2017)
page 119
EAR-Controlled Technology Subject to Restrictions Contained on the Cover Page.
ITIME
Displays and sets the interval time
Usage
ITIME <CR> or <LF>
Operating Modes
Open
Description
The ITIME command displays and allows you to set the interval time of the instrument. The inter-
val time is the time in hours, minutes and seconds between the start of each on time.
NOTE.
The time set by the ITIME command must be longer than the time set by the OTIME
command by at least five seconds.
When setting the interval time, use the hh:mm:ss format:
hh:
Hours—01 to 24
mm:
Minutes—00 to 59
ss:
Seconds—00 to 59
Returns
If no interval time has been set:
NO Interval time Enter time (hh:mm:ss):
If an interval time has been set:
Interval Time = 01:00:00 Enter time (hh:mm:ss):
Examples
Enter ITIME <CR> or <LF>
The instrument displays the current interval time and allows you to enter a new time:
Interval Time = 01:00:00 Enter time [hh:mm:ss]:
Enter a <CR><LF> to leave the interval time as is, or enter the time in hours, minutes and seconds,
and then enter a <CR><LF>.
See Also
OTIME, TIME, DATE
