manualshive.com logo in svg

Cisco Webex DX70, Administrator'S Manual

The Cisco Webex DX70 is an innovative video conferencing device designed for seamless collaboration. To navigate its features and maximize its potential, users can easily access the comprehensive User Manual available for free download from our website. Unlock the full potential of Cisco Webex DX70 with our user-friendly manual.

Share
Download
background image

D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.  

www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved. 

3

Cisco Webex DX70 and DX80

 Administrator Guide

Run diagnostics ................................................................................................................... 95
Download log files ............................................................................................................... 96
Create a remote support user ............................................................................................ 97
Backup and restore configurations and custom elements ................................................. 98
CUCM provisioning of custom elements ............................................................................ 99
TMS provisioning of custom elements .............................................................................. 100
Revert to the previously used software image ..................................................................101
Factory reset the video conferencing device ................................................................... 102
Capture user interface screenshots ................................................................................. 106

Device settings ............................................................................................................. 107

Overview of the device settings ....................................................................................... 108
Audio settings ....................................................................................................................113
Bluetooth settings ..............................................................................................................115
CallHistory settings ............................................................................................................116
Cameras settings ...............................................................................................................117
Conference settings ..........................................................................................................118
FacilityService settings ..................................................................................................... 122
H323 settings .................................................................................................................... 123
HttpClient settings ............................................................................................................ 126
HttpFeedback settings .......................................................................................................127
Logging settings ............................................................................................................... 128
Macros settings ................................................................................................................ 130
Network settings ................................................................................................................131
NetworkPort settings ........................................................................................................ 139
NetworkServices settings ................................................................................................. 140
Peripherals settings .......................................................................................................... 148
Phonebook settings .......................................................................................................... 149
Provisioning settings ..........................................................................................................151
Proximity settings.............................................................................................................. 154
RoomReset settings .......................................................................................................... 156
RTP settings ...................................................................................................................... 157
Security settings ............................................................................................................... 158
SerialPort settings ..............................................................................................................161
SIP settings ....................................................................................................................... 162
Standby settings ............................................................................................................... 167
SystemUnit settings .......................................................................................................... 168
Time settings .................................................................................................................... 169
UserInterface settings ........................................................................................................172
UserManagement settings .................................................................................................178
Video settings ................................................................................................................... 182
Experimental settings ....................................................................................................... 189

Appendices ................................................................................................................... 190

The user interface ..............................................................................................................191
Set up remote monitoring ................................................................................................. 192
Access call information and answer a call while using the web interface ........................ 193
Place a call using the web interface ................................................................................. 194
Share content using the web interface ............................................................................. 196
Local layout control ........................................................................................................... 197
Control a far end camera .................................................................................................. 198
Customize the video conferencing device's user interface .............................................. 199
Customize the video conferencing device's behavior using macros  .............................. 201
Remove default buttons from the user interface .............................................................. 202
Use of a third-party USB input device .............................................................................. 203
Sending HTTP(S) requests  .............................................................................................. 204
Manage startup scripts ..................................................................................................... 205
Access the device’s XML files  ......................................................................................... 206
Execute API commands and configurations from the web interface ............................... 207
About Ethernet ports ......................................................................................................... 208
Serial interface .................................................................................................................. 209
Open TCP Ports .................................................................................................................210
HTTPFeedback address from TMS....................................................................................212
Link an on-premises registered device to Cisco Webex Edge for Devices ......................213
Register a device to the Cisco Webex cloud service ........................................................214
Supported RFCs ................................................................................................................215
Technical specification .......................................................................................................216
User documentation on the Cisco web site .......................................................................218
Cisco contacts ...................................................................................................................219

Introduction

Configuration

Peripherals

Maintenance

Device settings

Appendices

Summary of Contents for Webex DX70




























































































































































































































Reviews:

No comments

Related manuals for Webex DX70

Panasonic SC-HC57 Owner'S Manual preview
SC-HC57
Brand: Panasonic Pages: 24
Panasonic SC-AP01 Operating Instructions Manual preview
SC-AP01
Brand: Panasonic Pages: 16
Neo Car Audio Car Audio Instruction Manual preview
Car Audio
Brand: Neo Car Audio Pages: 19
dbx DriveRack PA User Manual preview
DriveRack PA
Brand: dbx Pages: 52
Jäger ADwin-Gold Hardware Manual preview
ADwin-Gold
Brand: Jäger Pages: 50
Dickey-John Control Point Operator'S Manual preview
Control Point
Brand: Dickey-John Pages: 109
ewoo eFizz Travel User Manual preview
eFizz Travel
Brand: ewoo Pages: 85
Caberg just speak Instructions For Use Manual preview
just speak
Brand: Caberg Pages: 146
RADVision Scopia XT5000 Series User Manual preview
Scopia XT5000 Series
Brand: RADVision Pages: 55
ClearOne Collaborate FHD User Manual preview
Collaborate FHD
Brand: ClearOne Pages: 82
VAT Series 651 Installation, Operating, & Maintenance Instructions preview
Series 651
Brand: VAT Pages: 53
Polyaire Zonemaster ZoneTouch V2 Installation Manual preview
Zonemaster ZoneTouch V2
Brand: Polyaire Pages: 24
N-Com B802 Quick Manual preview
B802
Brand: N-Com Pages: 12
btsr MULTIFEEDER Operating Manual preview
MULTIFEEDER
Brand: btsr Pages: 73
Creator Electronics CR-IR1001-15 User Manual preview
CR-IR1001-15
Brand: Creator Electronics Pages: 52
Cattron MP48 Series User Manual preview
MP48 Series
Brand: Cattron Pages: 121
Kenwood KRC-16A Service Manual preview
KRC-16A
Brand: Kenwood Pages: 24
Kenwood KRC-15RG Service Manual preview
KRC-15RG
Brand: Kenwood Pages: 21

Brands by name

Popular brands

Load more brands