Cisco Webex DX70 Administrator'S Manual Download Page 145

Page: 145 / 219

D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.

145

Cisco Webex DX70 and DX80

Administrator Guide

NetworkServices SMTP Security

Choose if and how to secure the communication between the device and the SMTP server.

Requires user role: ADMIN
Default value: StartTls

Value space: None/StartTls/Tls

None: Connect to the SMTP server without encryption.
StartTls: Initially connect to the SMTP server without encryption, and then send a

STARTTLS command to upgrade to an encrypted connection (TLS).
Tls: Connect to the SMTP server over TLS (Transport Layer Security).

NetworkServices SNMP Mode

SNMP (Simple Network Management Protocol) is used by network management systems to

monitor and manage devices such as routers, servers, and switches, that are connected to

the IP network. SNMP exposes management data in the form of variables on the managed

devices, which describe the device status and configuration. These variables can then be

remotely queried, and sometimes set, by managing applications.

Requires user role: ADMIN, INTEGRATOR
Default value: Off

Value space: Off/ReadOnly/ReadWrite

Off: Disable the SNMP network service.
ReadOnly: Enable the SNMP network service for queries only.
ReadWrite: Enable the SNMP network service for both queries and commands.

NetworkServices SNMP CommunityName

Define the name of the SNMP community. The SNMP community name is used to

authenticate SNMP requests. If an SNMP request from a management system does not

include a matching community name (case sensitive), the message is dropped and the

SNMP agent in the video device will not send a response.
If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same

SNMP community is configured there.

Requires user role: ADMIN, INTEGRATOR
Default value: ""

Value space: String (0, 50)

The SNMP community name.

NetworkServices SNMP SystemContact

Define contact information that SNMP servers can use.

Requires user role: ADMIN, INTEGRATOR
Default value: ""

Value space: String (0, 50)

String that describes the contact information for the video device.

NetworkServices SNMP SystemLocation

Define location information that SNMP servers can use.

Requires user role: ADMIN, INTEGRATOR
Default value: ""

Value space: String (0, 50)

String that describes the location of the video device.

Introduction

Configuration

Peripherals

Maintenance

Device settings

Appendices



Device settings

Summary of Contents for Webex DX70




























































































































































































































Search results

Summary of Contents for Webex DX70

Reviews:

Related manuals for Webex DX70

Brands by name

Popular brands

Cisco Webex DX70, Administrator'S Manual

Search results

Summary of Contents for Webex DX70

Reviews:

Related manuals for Webex DX70

Brands by name

Popular brands