D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
83
Cisco Webex DX70 and DX80
Administrator Guide
Provisioning of product specific configurations from CUCM
(page 2 of 2)
Set up provisioning from CUCM
1. Sign in to CUCM, navigate to
Device >
Phone
, and find your device.
2. Find the
Product Specific Configuration
Layout
section (see illustration).
3. Click the
Miscellaneous
category and find
the
Configuration Control Mode
setting.
Choose your preferred mode: Unified CM,
Endpoint, or Unified CM and Endpoint (see
the description on the previous page).
4. Click the
Pull xConfig. from Device
button if you want to load the current
configuration from the device.
5. Select a category and set a value for the
configurations you want to change.
6. Finally, click
Save
and
Apply Config
, just
like you do in earlier CUCM versions.
Categories
The device settings are grouped
in categories. These are the same
categories that you find in the web
interface of the device. They also
correspond to the API command path.
Miscellaneous
is an exception to this
rule. In this category you find settings
that only can be set by CUCM. They
don't correspond to a local setting on
the device.
Pull configurations from the
device on-demand
Click this button to pull any data
configuration from the device on-
demand.
Settings or parameters
The settings that belong to the
selected category.
Settings marked with a hash, #
Settings that also were available in
Cisco UCM releases prior to 12.5(1)
SU1.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices
Configuration
