D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
144
Cisco Webex DX70 and DX80
Administrator Guide
NetworkServices SMTP Mode
You can set up the device to use SMTP (Simple Mail Transfer Protocol) for sending email
from the device to a mail server for relaying. This is required if you want to allow users
to send their whiteboards and presentations via email to people inside or outside their
organization.
If the device is set up for encrypted communication (see the NetworkServices SMTP
Security setting), the device only allows connections where the SMTP server's certificate is
validated. There is no option for ignoring the certificate check.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Disable SMTP (and email) support.
On: Enable SMTP support for sending email.
NetworkServices SMTP Server
This is the address of the SMTP server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
A valid IPv4 address, IPv6 address or DNS name.
NetworkServices SMTP Port
This port is used for outgoing emails from the device to the SMTP server.
Set a port number based on the encryption setting (NetworkServices SMTP Security) and
the requirements of the SMTP server. Do not use the default value.
Requires user role: ADMIN
Default value: 0
Value space: Integer (0..65535)
The port used for outgoing emails from the device.
NetworkServices SMTP Username
This is the username part of the credentials that are used to authenticate the device with
the SMTP server. This setting may be required by the SMTP server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 80)
A valid username.
NetworkServices SMTP Password
This is the password part of the credentials that are used to authenticate the device with
the SMTP server. This setting may be required by the SMTP server.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 64)
A valid password.
NetworkServices SMTP From
When sending an email message from this device, this is the name of the mailbox that the
message is sent from.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 255)
An email address that meets the requirements of the SMTP server.
Introduction
Configuration
Peripherals
Maintenance
Device settings
Appendices
Device settings
