manualshive.com logo in svg

Cisco Webex DX70, Administrator'S Manual

The Cisco Webex DX70 is an innovative video conferencing device designed for seamless collaboration. To navigate its features and maximize its potential, users can easily access the comprehensive User Manual available for free download from our website. Unlock the full potential of Cisco Webex DX70 with our user-friendly manual.

Share
Download
background image

D15362.16 DX70 and DX80 Administrator Guide CE9.13, JUNE 2020.  

www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved. 

114

Cisco Webex DX70 and DX80

 Administrator Guide

Audio Ultrasound Mode

This setting applies to the Intelligent Proximity feature. Keep the setting at its default value.

Requires user role: ADMIN, INTEGRATOR
Default value: Dynamic

Value space: Dynamic/Static

Dynamic: The device adjusts the ultrasound volume dynamically. The volume may vary 

up to the maximum level as defined in the Audio Ultrasound Volume MaxVolume setting.
Static: Use only if advised by Cisco.

Audio Ultrasound MaxVolume

This setting applies to the Intelligent Proximity feature. Set the maximum volume of the 

ultrasound pairing messages.
The Audio Ultrasound MaxVolume and Proximity Mode settings only affect ultrasound 

pairing messages. See the RoomAnalytics PeoplePresenceDetector and Standby 

WakeupOnMotionDetection settings for information about the use of ultrasound in presence 

and motion detection.

Requires user role: ADMIN, INTEGRATOR
Default value: 70

Value space: Integer (0..70)

Select a value in the specified range. If set to 0, ultrasound pairing messages are not 

emitted.

Introduction

Configuration

Peripherals

Maintenance

Device settings

Appendices

Device settings

Summary of Contents for Webex DX70




























































































































































































































Reviews:

No comments

Related manuals for Webex DX70

Balboa BP600 Tech Sheet preview
BP600
Brand: Balboa Pages: 23
Waterway NEO 1200 Instruction Manual preview
NEO 1200
Brand: Waterway Pages: 8
Verizon One Talk CP965 User Manual preview
One Talk CP965
Brand: Verizon Pages: 69
Aastra IntelliGate 2025 User Manual preview
IntelliGate 2025
Brand: Aastra Pages: 71
SystemBase C530ip Series User Manual preview
C530ip Series
Brand: SystemBase Pages: 22
DC-Connex DCX-313 Quick Start Manual preview
DCX-313
Brand: DC-Connex Pages: 16
Redback A 6500 Operating Manual preview
A 6500
Brand: Redback Pages: 16
Panasonic SC-EN37 Operating Instructions Manual preview
SC-EN37
Brand: Panasonic Pages: 8
Panasonic SCEN15 - DESKTOP CD AUDIO SYS Operating Instructions Manual preview
SCEN15 - DESKTOP CD AUDIO SYS
Brand: Panasonic Pages: 8
Panasonic SCEN33 - CD STEREO SYSTEM Operating Instructions Manual preview
SCEN33 - CD STEREO SYSTEM
Brand: Panasonic Pages: 8
Yamaha MusicCast 200 TSX-N237 Brochure preview
MusicCast 200 TSX-N237
Brand: Yamaha Pages: 44
RCA RS2202 Instruction Manual preview
RS2202
Brand: RCA Pages: 68
Technika MC-229I Owner'S Handbook Manual preview
MC-229I
Brand: Technika Pages: 16
Hitachi HPS809E Instruction Manual preview
HPS809E
Brand: Hitachi Pages: 14
Hitachi AXM949E Quick Start Manual preview
AXM949E
Brand: Hitachi Pages: 4
Hitachi AXM846E Quick Start Manual preview
AXM846E
Brand: Hitachi Pages: 4
Hitachi CX-V3 Instruction Manual preview
CX-V3
Brand: Hitachi Pages: 28
Hitachi AXM845E Instruction Manual preview
AXM845E
Brand: Hitachi Pages: 32

Brands by name

Popular brands

Load more brands