Cisco ONS 15454 DWDM, Installation And Operation Manual

Page: 1042 / 1218

B-12
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
December 2006
Appendix B Hardware Specifications
B.3.6 MIC-C/T/P FMEC Specifications (ETSI only)
• Dimensions
–
Height: 182 mm (7.165 in.)
–
Width: 32 mm (1.25 in.)
–
Depth: 92 mm (3.62 in.)
– Depth with backplane connector: 98 mm (3.87 in.)
–
Weight not including clam shell: 0.2 kg (0.5 lb)
B.3.6 MIC-C/T/P FMEC Specifications (ETSI only)
The MIC-C/T/P FMEC card has the following specifications:
•
Power supply input BATTERY A
– System supply voltage: Nominal –48 VDC
Tolerance limits: –40.5 to –57.0 VDC
–
Connector: 3WK3 Combo-D power cable connector
• Timing connector
–
Frequency: 2.048 MHz +/–10 ppm
–
Signal level: 0.75 to 1.5 V
–
Impedance: 75 ohms +/–5 percent (switchable by jumper to high impedance > 3 kohms)
Note
120 ohms balanced impedance is possible with external matching cable.
–
Cable attenuation: Up to 6 dB at 2 MHz
–
Connectors: 1.0/2.3 miniature coax connector
•
System management serial port:
–
System management serial port craft interface
–
Modem port (for future use)
– Connectors: 8-pin RJ-45
•
System management LAN port connectors:
–
Signal: IEEE 802.3 10BaseT
–
Connectors: 8-pin RJ-45
•
Environmental
–
Operating temperature: –5 to +45 degrees Celsius (+23 to +113 degrees Fahrenheit)
– Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 0.38 W (provided by +5 V from the TCC2/TCC2P card), 1.37 BTU/hr
•
Dimensions
–
Height: 182 mm (7.165 in.)
–
Width: 32 mm (1.25 in.)
–
Depth: 92 mm (3.62 in.)
– Depth with backplane connector: 98 mm (3.87 in.)